Search

All Products

Sign in / Register
Safes

Safes

Main Menu

Safes

Product CATEGORIES

All CATEGORIES

PTAC

  • GE ZONELINE DELUXE SERIES HEAT PUMP UNIT WITH ICR, 265 VOLT AZ61H12EAD

    SKU: 30684

    Description :

    Specs & Details : Cooling capacity Energy efficiency Dehumidification Dimensions : 16 H x 42 W x 20 7/8 D CAPACITY : Cooling BTUH (MIN) : 11700.0 Btu Cooling EER (BTUH / Watt) : 11.4 CFM Indoor Fan High : 370 CFM Indoor Fan Low : 284 Dehumidification (pts./hr.) : 3.5 Heating - Reverse Cycle - BTUH : 10900 Vent CFM (high fan at zero ESP) : 75/45 FEATURES : Sensible Heat Ratio : 70% Chassis Type : Slide-In Control Type : Standard Microcomputer Tactile touch pad with LED Display Discharge Grille : 2-position Electronic Micro Computer Control : Yes Fan Cycle Switch : Yes Fan Motor : 2 Fan Speed Control : Yes Fan Speed Selections : Hi/Low Cooling Hi/Low Fan Only Hi/Low Heating Filter Type : Rigid Frame Slide-Out Heat - Cool : Yes Internal Condensate Removal (ICR) : Yes Louver Style : Reversible Manual Vent Control : Hidden Rotary Compressor : Yes Temperature Limiting : Electronic 7-Step Vent Control : 3-position Venting Features : Concealed Manual Vent Control Outdoor Vent Control - 3 Positions Vent Air Filter Zoneline Features : "Sleep" Mode "Smart Fan" Fan Cycle Control 3-Stage Heating Design Auto Power Recovery Automatic Emergency Heat Automatic Indoor Frost Control Central Desk Control Compatibility Freeze Sentinel Heat Pump with Resistance Heat Backup Heat Pump with Supplemental Resistance Heat Heat Sentinel Power Cord (LDCI) included Proportional - Integral ID Airflow Quick Heat Recovery Random Twist/Length Segment Tangential Blower Remote Thermostat Compatibility Reverse Cycle Defrost Universal Heaters Weather Protected Electrical Components Temperature Range : 60 - 85 F POWER / RATINGS : Cooling - Amperes; F.L. - Cooling : 4.0 Cooling - Amperes; L.R. : 23.5 Cooling - Watts : 1015 Heating - Reverse Cycle - Amps : 3.6 Heating - Reverse Cycle - COP : 3.6 Heating - Reverse Cycle - Watts : 880 Power Factor : 92 Voltage (MAX) : 265.0 V WARRANTY : Parts Warranty : Limited 1-year entire appliance Limited 5-year sealed refrigerating system Labor Warranty : Limited 1-year entire appliance Limited 5-year sealed refrigerating system Warranty Notes : See written warranty for full details WEIGHTS & DIMENSIONS : Net Weight : 107.0 lb Overall Depth : 20.875 in Overall Height : 16.0 in Overall Width : 42.0 in Overall Depth (Excludes Sleeve) : 19.8125 in Overall Height (Excludes Sleeve) : 15.5 in Overall Width (Excludes Sleeve) : 40.0 in  

  • Hotpoint PTAC 20 amps, 230/208 Volt

    SKU: AH11E09D3B

    Description :

    AH11E09D3B APPROX. DIMENSIONS (HxWxD) 16 in x 42 in x 21 in FEATURES : Chassis Type : Slide-In Control Type : Electronic Discharge Grille : 2-position Fan Motor : 2 Fan Speed Selections : 3 Heating Heat - Cool : Yes Manual Vent Control : Hidden Rotary Compressor : Yes Venting Features : Vent Air Filter Zoneline Features : Remote Thermostat Compatibility Outdoor Vent / Exhaust : Yes Refrigerant Type : R-410A Temperature Range : 61->86 F CAPACITY : Cooling BTUH (MIN) : 9000.0 Btu Cooling BTUH (MAX) : 9200.0 Btu Cooling EER (BTUH / Watt) : 11.3 CFM Indoor Fan High : 435 CFM Indoor Fan Low : 394 Heating - Reverse Cycle - BTUH : 10900/8900 WEIGHTS & DIMENSIONS : Approximate Shipping Weight : 130 lb Net Weight : 105 lb Overall Depth : 21 in Overall Height : 16 in Overall Width : 42 in POWER / RATINGS : Cooling - Amperes; F.L. - Cooling : 3.5/3.8 Cooling - Watts : 814/796 Heating - Electric - Heater Watts : 3519/2850 Heating - Electric - Heater Amps : 15.3/13.7 Voltage (MIN) : 208.0 V Voltage (MAX) : 230.0 V CLAIMS & CERTIFICATIONS : CUL WARRANTY : Parts Warranty : Limited 5-year sealed refrigerating system Labor Warranty : Limited 5-year sealed refrigerating system Warranty Notes : See written warranty for full details OVERVIEW : 3-speed fan : Give guests control over their comfort with three fan speeds to choose from         4-temperature limiting options : Easily select one of four temperature ranges for peak efficiency and total customer comfort          Freeze and frost protection : Automatic freeze and indoor frost control keep units operating in peak condition         Auto power recovery : In case of power failures, units automatically resume their operation when power restores, reducing maintenance calls          Self diagnostics : Quickly and easily identify service needs with a nine-point diagnostic code system          Automatic emergency heat : Keep guests comfortable with a heating option that uses electric resistance heat in heat pump mode          Backed by an industry leader : With a long history of creating durable products at an affordable price, Hotpoint is your trusted PTAC brand          1-year full parts and labor warranty / 5-year limited warranty : Enjoy peace of mind with a 1-year full warranty on parts and labor, and a 5-year limited warranty, knowing that all purchases are backed by the trusted Hotpoint service network         Intuitive display : Allow guests to easily customize their preferred settings and reduce maintenance calls with an easy-to-use control panel          Power cord (LCDI) included : Hotpoint PTACs come with everything needed for a quick and easy installation          Remote thermostat compatibility          Works with central desk control systems          Heatpump models include staged heating          Tangential fan for air flow and smooth sound          Energy-efficient heat pump models available          Removable filters for easy maintenance  

  • 9,400 BTU Packaged Terminal Air Conditioner with Electric Heat, 12.1 EER, 2.1 Pts/Hr Dehumidification, Dual Motors, Room Freeze Protection and 265 Volts

    SKU: PDE09R3SG

    Description :

    Specifications : Width : 42 Inch Depth : 21 1/2 Inch Height : 16 Inch Cooling Capacity (BTU) : 9,400 BTU CFM Room Circulation : 355 CFM Chassis Type : Thru the Wall Wall Sleeve Included : No Control Type : Digital Remote Control Included : No Plug Type : 7-20P Product Information : Brand : Friedrich Model : PDE09R3SG Dimensions : Width : 42 Inch Depth : 21 1/2 Inch Height : 16 Inch Capacity : Cooling Capacity (BTU) : 9,400 BTU CFM Room Circulation : 355 CFM Features : Type : Wall Chassis Type : Thru the Wall Wall Sleeve Included : No Maximum Cooling Amps : 3.3 Amps Maximum Cooling Watts : 775 Watts Heat : Electric Heat Energy Efficiency Rating : 12.1 Control Type : Digital Remote Control Included : No PTAC : Yes Technical Details : Energy Star Rated : No ADA Compliant : No Plug Type : 7-20P Voltage : 265 Volts Features : Durable and Reliable Construction Stainless steel endplates reduce outdoor coil corrosion. Galvanized zinc coated steel wall sleeve and steel base pan undergo an 11-step preparation process, are powder  coated with a polyester finish and cured in an oven for exceptional durability. Additional heating element bottom plate above an improved heat shield provides extra thermal protection. Additional thermistor on the blower scroll outlet regulates internal temperature. Factory run-tested units reduce problems in the field. Internal diagnostic program can alert maintenance to component failures or operating problems. Fourteen numeric service error codes stored in memory facilitate rapid unit diagnostics. Easy access anti-microbial filters simplify maintenance and extend the life of the product. Room freeze protection initiates heat if temperature falls to 40°F in an unoccupied room. Random compressor restart protects electrical systems from overload when power is restored. Tamper-resistant, anodized stamped aluminum grille withstands chalking and oxidation. Break-proof control door design maintains the integrity of the unit. Indoor coil frost sensor protects the compressor to lengthen the life of the unit. Diamonblue Technology protects the outdoor coil from harsh environments. Industry leading warranty features 2 year full warranty on parts and labor and 5 year limited warranty. Nationwide service network and U.S.-based Friedrich expert technical team ensures you get fast, knowledgeable service. Energy Efficient and Energy Smart Super-efficient refrigeration design with 12.1 EER and 3.5 COP. Exceptional FriedrichLink energy management thermostats available (wired and wireless) with integrated occupancy sensor, five distinct energy presets and comprehensive remote management capability. Advanced coil design adds more surface area leading to higher efficiencies. Thicker steel inner-wall and foam construction decreases thermal transfer and energy loss. Electronic defrost control ensures more run time in efficient heat pump mode. Electronic temperature limiting to adjust low/high temperature range limits for reduced energy usage. Slinger ring technology in condensate removal system cools the coil and increases efficiency. Desk control ready to allow hotel owners to control units from a central location. Comfort, Health and IAQ Dehumidification removes up to 2.1 pints/hour of moisture in cool mode to improve comfort and reduce the chance of mold and mildew growth. Constant Fan mode provides constant fan operation in cooling or heating modes to create a steady stream of white noise that masks sound level changes when the compressor cycles on/off. Fresh air damper brings in fresh outside air when desired. Intuitive unit controls are user friendly with easy-to-read LED display that can show either set-point or actual room  temperature as selected by owner. Anti-microbial air filters are easy to access and washable. Instant Heat on heat pump models quickly heats a room to the desired temperature for increased comfort. Even-heat monitoring checks room temperature and automatically adds heat boost if necessary. Automatic periodic sampling of room temperature to ensure desired conditions are maintained. Reversible indoor air louvers to easily change direction of airflow. Ease Of Maintenance and Installation Ease of SKU creation as universal heaters with heat capacities are determined by the power cords; can achieve up to 40 PTAC SKUs with 16 units by changing the power cord size. Modular product design ensures easy access to key components for cleaning and repairs, including washable, lift-out air filters. Remote thermostat pop-out wiring module allows easier wiring and unit change out without rewiring thermostat. Compact front is designed to preserve indoor floor space with a depth of 7-3/4 inches. Faultless Sure-hold Front Cover System securely attaches the front each time. Inner wall service plate provides service access to tangential blower bearing without having to open up the entire inner wall. May be installed flush with the floor. Sound Reduction Technology Two permanently lubricated fan motors for added durability and reduced sound levels indoors. Quiet, efficient rotary compressor mounted with vibration isolators to keep the compressor running smoothly and quietly. High-density insulation and steel inner wall block outdoor noise.  

  • ZoneAire® Premier Package Terminal Air Conditioner

    SKU: 15000 Btu

    Description :

    Our most efficient standard PTAC with exceptional performance and leading warranty for the lowest cost of operation. ZoneAire Premier PTAC is available in electric heat and heat pump options, ranging from 7,000 to 15,000 Btu. Specifications By Model : Model : PDE07K3SG Operation : Cool/Elect. Heat Cooling BTU : 7200/7000 Reverse Heating BTU : - Voltage : 230/208 EER : 13.0/13.0 COP @ 47°F : - Cooling Area (Sq Ft.) : 250-300 Model : PDE07R3SG Operation : Cool/Elect. Heat Cooling BTU : 7200 Reverse Heating BTU : - Voltage : 265 EER : 13.0 COP @ 47°F : - Cooling Area (Sq Ft.) : 250-300 Model : PDE09K3SG Operation : Cool/Elect. Heat Cooling BTU : 9400/9200 Reverse Heating BTU : - Voltage : 230/208 EER : 12.1/12.1 COP @ 47°F : - Cooling Area (Sq Ft.) : 350–400 Model : PDE09R3SG Operation : Cool/Elect. Heat Cooling BTU : 9400 Reverse Heating BTU : - Voltage : 265 EER : 12.1 COP @ 47°F : - Cooling Area (Sq Ft.) : 350–400 Model : PDE12K3SG Operation : Cool/Elect. Heat Cooling BTU : 11800/11600 Reverse Heating BTU : - Voltage : 230/208 EER : 11.6/11.6 COP @ 47°F : - Cooling Area (Sq Ft.) : 450-550 Model : PDE12R3SG Operation : Cool/Elect. Heat Cooling BTU : 11800 Reverse Heating BTU : - Voltage : 265 EER : 11.6 COP @ 47°F : - Cooling Area (Sq Ft.) : 450-550 Model : PDE15K5SG Operation : Cool/Elect. Heat Cooling BTU : 14500/14200 Reverse Heating BTU : - Voltage : 230/208 EER : 10.4/10.4 COP @ 47°F : - Cooling Area (Sq Ft.) : 550-650 Model : PDE15R5SG Operation : Cool/Elect. Heat Cooling BTU : 14500 Reverse Heating BTU : - Voltage : 265 EER : 10.4 COP @ 47°F : - Cooling Area (Sq Ft.) : 550-650 Model : PDH07K3SG Operation : Cool/Heat Pump Cooling BTU : 7200/7000 Reverse Heating BTU : 6000/5800 Voltage : 230/208 EER : 13.0/13.0 COP @ 47°F : 3.6/3.6 Cooling Area (Sq Ft.) : 250-300 Model : PDH07R3SG Operation : Cool/Heat Pump Cooling BTU : 7200 Reverse Heating BTU : 6000 Voltage : 265 EER : 13.0 COP @ 47°F : 3.6 Cooling Area (Sq Ft.) : 250-300 Model : PDH09K3SG Operation : Cool/Heat Pump Cooling BTU : 9400/9200 Reverse Heating BTU : 8300/8100 Voltage : 230/208 EER : 12.1/12.1 COP @ 47°F : 3.5/3.5 Cooling Area (Sq Ft.) : 350–400 Model : PDH09R3SG Operation : Cool/Heat Pump Cooling BTU : 9400 Reverse Heating BTU : 8300 Voltage : 265 EER : 12.1 COP @ 47°F : 3.5 Cooling Area (Sq Ft.) : 350–400 Model : PDH12K3SG Operation : Cool/Heat Pump Cooling BTU : 11800/11600 Reverse Heating BTU : 10600/10400 Voltage : 230/208 EER : 11.6/11.6 COP @ 47°F : 3.4/3.4 Cooling Area (Sq Ft.) : 450-550 Model : PDH12R3SG Operation : Cool/Heat Pump Cooling BTU : 11800 Reverse Heating BTU : 10600 Voltage : 265 EER : 11.6 COP @ 47°F : 3.4 Cooling Area (Sq Ft.) : 450-550 Model : PDH15K5SG Operation : Cool/Heat Pump Cooling BTU : 14500/14200 Reverse Heating BTU : 13300/13000 Voltage : 230/208 EER : 10.4/10.4 COP @ 47°F : 3.1/3.1 Cooling Area (Sq Ft.) : 550-650 Model : PDH15R5SG Operation : Cool/Heat Pump Cooling BTU : 14500 Reverse Heating BTU : 13300 Voltage : 265 EER : 10.4 COP @ 47°F : 3.1 Cooling Area (Sq Ft.) : 550-650   Chassis Sizes for this Product : H: 16“ x W: 42“ x D: 21 1⁄2” FreshAire PTAC Model Dimensions Applies to model #’s : PDE07K, PDE07R, PDE09K, PDE09R, PDE12K, PDE12R, PDE15K, PDE15R, PDH07K, PDH07R, PDH09K, PDH09R, PDH12K, PDH12R, PDH15K, PDH15R Features : Durable Construction : Superior materials and design reduce sound levels and improve overall guest satisfaction. Galvanized zinc coated steel wall sleeve and steel base pan undergo an 11-step preparation process, are powder coated with a polyester finish and are oven-cured at high temperature for exceptional durability. Stainless Steel endplates reduce corrosion of the outdoor coil.   Energy Efficiency : Friedrich PTACs feature a super-efficient refrigeration design with EERs up to 13.0 and COP up to 3.6. Energy efficient heat pump models are also available in our complete line. Comfort & Convenience : Intuitive unit controls are user friendly with easy-to-read LED display that can show either set point or actual room temperature as selected by owner. Dehumidification removes moisture in cool mode to improve comfort and reduce the chance of mold and mildew growth.   Sound Reduction Technology : Friedrich PTACs come standard with two permanently lubricated fan motors for added durability and reduced sound levels indoors. Units also have a quiet, efficient rotary compressor mounted with vibration isolators to keep the compressor running smoothly and quietly. High-density insulation and steel inner wall block outdoor noise. Warranty & Support : Friedrich’s industry leading warranty features 2-year full warranty on parts and labor and 5-year limited warranty. Our nationwide service network and U.S.-based Friedrich expert technical team ensures you get fast, knowledgeable service. Maintenance and Installation : Modular product design ensures easy access to key components for cleaning and repairs, including washable, lift-out air filters. Surehold Front Cover System® securely attaches the front each time. Unit may be installed low to the floor.  

  • GE ZONELINE DELUXE SERIES HEAT PUMP UNIT WITH ICR, 230/208 VOLT AZ61H12DAD

    SKU: 30685

    Description :

    Specs & Details : Cooling capacity Energy efficiency Dehumidification Dimensions : 16 H x 42 W x 20 7/8 D CAPACITY : Cooling BTUH (MIN) : 11600.0 Btu Cooling BTUH (MAX) : 11700.0 Btu Cooling EER (BTUH / Watt) : 11.4/11.4 CFM Indoor Fan High : 370 CFM Indoor Fan Low : 284 Dehumidification (pts./hr.) : 3.5 Heating - Reverse Cycle - BTUH : 10600/10400 Vent CFM (high fan at zero ESP) : 75/45 FEATURES : Sensible Heat Ratio : 70% Chassis Type : Slide-In Control Type : Standard Microcomputer Tactile touch pad with LED Display Discharge Grille : 2-position Electronic Micro Computer Control : Yes Fan Cycle Switch : Yes Fan Motor : 2 Fan Speed Control : Yes Fan Speed Selections : Hi/Low Cooling Hi/Low Fan Only Hi/Low Heating Filter Type : Rigid Frame Slide-Out Heat - Cool : Yes Internal Condensate Removal (ICR) : Yes Louver Style : Reversible Manual Vent Control : Hidden Rotary Compressor : Yes Temperature Limiting : Electronic 7-Step Vent Control : 3-position Venting Features : Concealed Manual Vent Control Outdoor Vent Control - 3 Positions Vent Air Filter Zoneline Features : "Sleep" Mode "Smart Fan" Fan Cycle Control 3-Stage Heating Design Auto Power Recovery Automatic Emergency Heat Automatic Indoor Frost Control Central Desk Control Compatibility Freeze Sentinel Heat Pump with Resistance Heat Backup Heat Pump with Supplemental Resistance Heat Heat Sentinel Power Cord (LDCI) included Proportional - Integral ID Airflow Quick Heat Recovery Random Twist/Length Segment Tangential Blower Remote Thermostat Compatibility Reverse Cycle Defrost Universal Heaters Weather Protected Electrical Components Temperature Range : 60 - 85 F POWER / RATINGS : Cooling - Amperes; F.L. - Cooling : 4.6/5.0 Cooling - Amperes; L.R. : 29.5 Cooling - Watts : 980/960 Heating - Reverse Cycle - Amps : 4.1/4.5 Heating - Reverse Cycle - COP : 3.6/3.6 Heating - Reverse Cycle - Watts : 855/835 Power Factor : 92 Voltage (MIN) : 208.0 V Voltage (MAX) : 230.0 V WARRANTY : Parts Warranty : Limited 1-year entire appliance Limited 5-year sealed refrigerating system Labor Warranty : Limited 1-year entire appliance Limited 5-year sealed refrigerating system Warranty Notes : See written warranty for full details WEIGHTS & DIMENSIONS : Net Weight : 106.0 lb Overall Depth : 20.875 in Overall Height : 16.0 in Overall Width : 42.0 in Overall Depth (Excludes Sleeve) : 19.8125 in Overall Height (Excludes Sleeve) : 15.5 in Overall Width (Excludes Sleeve) : 40.0 in  

  • Hotpoint PTAC with Electric Heat 20 amps, 230/208 Volt

    SKU: AH11E07D3B

    Description :

    AH11E07D3B APPROX. DIMENSIONS (HxWxD) 16 in x 42 in x 21 in FEATURES : Chassis Type : Slide-In Control Type : Electronic Discharge Grille : 2-position Fan Motor : 2 Fan Speed Selections : 3 Heating Heat - Cool : Yes Manual Vent Control : Hidden Rotary Compressor : Yes Venting Features : Vent Air Filter Zoneline Features : Remote Thermostat Compatibility Outdoor Vent / Exhaust : Yes Refrigerant Type : R-410A Temperature Range : 61->86 F CAPACITY : Cooling BTUH (MIN) : 7100.0 Btu Cooling BTUH (MAX) : 7300.0 Btu Cooling EER (BTUH / Watt) : 11.9 CFM Indoor Fan High : 417 CFM Indoor Fan Low : 382 Heating - Reverse Cycle - BTUH : 10900/8900 WEIGHTS & DIMENSIONS : Approximate Shipping Weight : 124 lb Net Weight : 99 lb Overall Depth : 21 in Overall Height : 16 in Overall Width : 42 in POWER / RATINGS : Cooling - Amperes; F.L. - Cooling : 2.7/2.9 Cooling - Watts : 613/596 Heating - Electric - Heater Watts : 3519/2850 Heating - Electric - Heater Amps : 15.3/13.7 Voltage (MIN) : 208.0 V Voltage (MAX) : 230.0 V CLAIMS & CERTIFICATIONS : CUL WARRANTY : Parts Warranty : Limited 5-year sealed refrigerating system Labor Warranty : Limited 5-year sealed refrigerating system Warranty Notes : See written warranty for full details OVERVIEW :   4-temperature limiting options : Easily select one of four temperature ranges for peak efficiency and total customer comfort          Freeze and frost protection : Automatic freeze and indoor frost control keep units operating in peak condition        Auto power recovery : In case of power failures, units automatically resume their operation when power restores, reducing maintenance calls          Self diagnostics : Quickly and easily identify service needs with a nine-point diagnostic code system          Automatic emergency heat : Keep guests comfortable with a heating option that uses electric resistance heat in heat pump mode          Backed by an industry leader : With a long history of creating durable products at an affordable price, Hotpoint is your trusted PTAC brand          1-year full parts and labor warranty / 5-year limited warranty : Enjoy peace of mind with a 1-year full warranty on parts and labor, and a 5-year limited warranty, knowing that all purchases are backed by the trusted Hotpoint service network    Remote thermostat compatibility          Works with central desk control systems               Tangential fan for air flow and smooth sound               Removable filters for easy maintenance      Intuitive display : Allow guests to easily customize their preferred settings and reduce maintenance calls with an easy-to-use control panel          Power cord (LCDI) included : Hotpoint PTACs come with everything needed for a quick and easy installation  

  • 7,200 BTU Packaged Terminal Air Conditioner with 6,000 BTU Heat Pump, 3.0 kW Electric Heat Backup, 13.0 EER, 1.7 Pts/Hr Dehumidification and 265 Volts

    SKU: PDH07R3SG

    Description :

    Specifications : Width : 42 Inch Depth : 21 1/2 Inch Height : 16 Inch Cooling Capacity (BTU) : 7,200 BTU Heating Capacity (BTU) : 6,000 BTU CFM Room Circulation : 345 CFM Chassis Type : Thru the Wall Wall Sleeve Included : No Control Type : Digital Remote Control Included : No Plug Type : 7-20P Product Information : Brand : Friedrich Model : PDH07R3SG Dimensions : Width : 42 Inch Depth : 21 1/2 Inch Height : 16 Inch Capacity : Cooling Capacity (BTU) : 7,200 BTU Heating Capacity (BTU) : 6,000 BTU CFM Room Circulation : 345 CFM Features : Type : Wall Chassis Type : Thru the Wall Wall Sleeve Included : No Maximum Cooling Amps : 2.4 Amps Maximum Cooling Watts : 550 Watts Maximum Heating Amps : 2.2 Amps Maximum Heating Watts : 485 Watts Heat : Heat Pump with Electric Heat Backup Energy Efficiency Rating : 13 Control Type : Digital Remote Control Included : No PTAC : Yes Technical Details : Energy Star Rated : No ADA Compliant : No Plug Type : 7-20P Voltage : 265 Volts Features : Durable and Reliable Construction Stainless steel endplates reduce outdoor coil corrosion. Galvanized zinc coated steel wall sleeve and steel base pan undergo an 11-step preparation process, are powder  coated with a polyester finish and cured in an oven for exceptional durability. Additional heating element bottom plate above an improved heat shield provides extra thermal protection. Additional thermistor on the blower scroll outlet regulates internal temperature. Factory run-tested units reduce problems in the field. Internal diagnostic program can alert maintenance to component failures or operating problems. Fourteen numeric service error codes stored in memory facilitate rapid unit diagnostics. Easy access anti-microbial filters simplify maintenance and extend the life of the product. Room freeze protection initiates heat if temperature falls to 40°F in an unoccupied room. Random compressor restart protects electrical systems from overload when power is restored. Tamper-resistant, anodized stamped aluminum grille withstands chalking and oxidation. Break-proof control door design maintains the integrity of the unit. Indoor coil frost sensor protects the compressor to lengthen the life of the unit. Diamonblue Technology protects the outdoor coil from harsh environments. Industry leading warranty features 2 year full warranty on parts and labor and 5 year limited warranty. Nationwide service network and U.S.-based Friedrich expert technical team ensures you get fast, knowledgeable service. Energy Efficient and Energy Smart Super-efficient refrigeration design with 12.1 EER and 3.5 COP. Exceptional FriedrichLink energy management thermostats available (wired and wireless) with integrated occupancy sensor, five distinct energy presets and comprehensive remote management capability. Advanced coil design adds more surface area leading to higher efficiencies. Thicker steel inner-wall and foam construction decreases thermal transfer and energy loss. Electronic defrost control ensures more run time in efficient heat pump mode. Electronic temperature limiting to adjust low/high temperature range limits for reduced energy usage. Slinger ring technology in condensate removal system cools the coil and increases efficiency. Desk control ready to allow hotel owners to control units from a central location. Comfort, Health and IAQ Dehumidification removes up to 2.1 pints/hour of moisture in cool mode to improve comfort and reduce the chance of mold and mildew growth. Constant Fan mode provides constant fan operation in cooling or heating modes to create a steady stream of white noise that masks sound level changes when the compressor cycles on/off. Fresh air damper brings in fresh outside air when desired. Intuitive unit controls are user friendly with easy-to-read LED display that can show either set-point or actual room  temperature as selected by owner. Anti-microbial air filters are easy to access and washable. Instant Heat on heat pump models quickly heats a room to the desired temperature for increased comfort. Even-heat monitoring checks room temperature and automatically adds heat boost if necessary. Automatic periodic sampling of room temperature to ensure desired conditions are maintained. Reversible indoor air louvers to easily change direction of airflow. Ease Of Maintenance and Installation Ease of SKU creation as universal heaters with heat capacities are determined by the power cords; can achieve up to 40 PTAC SKUs with 16 units by changing the power cord size. Modular product design ensures easy access to key components for cleaning and repairs, including washable, lift-out air filters. Remote thermostat pop-out wiring module allows easier wiring and unit change out without rewiring thermostat. Compact front is designed to preserve indoor floor space with a depth of 7-3/4 inches. Faultless Sure-hold Front Cover System securely attaches the front each time. Inner wall service plate provides service access to tangential blower bearing without having to open up the entire inner wall. May be installed flush with the floor. Sound Reduction Technology Two permanently lubricated fan motors for added durability and reduced sound levels indoors. Quiet, efficient rotary compressor mounted with vibration isolators to keep the compressor running smoothly and quietly. High-density insulation and steel inner wall block outdoor noise.  

  • ZoneAire® Select Package Terminal Air Conditioner

    SKU: 7000-15000 Btu

    Description :

    Excellent energy efficiency, low sound levels and reliable performance, all backed by an outstanding warranty. ZoneAire Select PTAC is available in electric heat and heat pump options, ranging from 7,000 to 15,000 Btu.   Specifications By Model : Model : PZE07K3SB Operation : Cool/Elect. Heat Cooling BTU : 7200/6800 Reverse Heating BTU : - Voltage : 230/208 EER : 12.0/12.0 COP @ 47°F : - Cooling Area (Sq Ft.) : 250-300 Model : PZE09K3SB Operation : Cool/Elect. Heat Cooling BTU : 9600/9400 Reverse Heating BTU : - Voltage : 230/208 EER : 11.8/11.8 COP @ 47°F : - Cooling Area (Sq Ft.) : 400-450 Model : PZE09R3SB Operation : Cool/Elect. Heat Cooling BTU : 9200 Reverse Heating BTU : - Voltage : 265 EER : 11.5 COP @ 47°F : - Cooling Area (Sq Ft.) : 350-400 Model : PZE12K3SB Operation : Cool/Elect. Heat Cooling BTU : 12000/11800 Reverse Heating BTU : - Voltage : 230/208 EER : 11.4/11.4 COP @ 47°F : - Cooling Area (Sq Ft.) : 450-550 Model : PZE12R3SB Operation : Cool/Elect. Heat Cooling BTU : 12000 Reverse Heating BTU : - Voltage : 265 EER : 10.6 COP @ 47°F : - Cooling Area (Sq Ft.) : 450-550 Model : PZE15K5SB Operation : Cool/Elect. Heat Cooling BTU : 14500/14300 Reverse Heating BTU : - Voltage : 230/208 EER : 10.2/10.2 COP @ 47°F : - Cooling Area (Sq Ft.) : 550-650 Model : PZH07K3SB Operation : Cool/Elect. Heat Cooling BTU : 7200/6800 Reverse Heating BTU : 6400/6300 Voltage : 230/208 EER : 12.0/12.0 COP @ 47°F : 3.55/3.54 Cooling Area (Sq Ft.) : 250-300 Model : PZH09K3SB Operation : Cool/Elect. Heat Cooling BTU : 9600/9400 Reverse Heating BTU : 8500/8200 Voltage : 230/208 EER : 11.8/11.8 COP @ 47°F : 3.51/3.51 Cooling Area (Sq Ft.) : 400-450 Model : PZH09R3SB Operation : Cool/Elect. Heat Cooling BTU : 9200 Reverse Heating BTU : 8500 Voltage : 265 EER : 11.5 COP @ 47°F : 3.5 Cooling Area (Sq Ft.) : 350-400 Model : PZH12K3SB Operation : Cool/Elect. Heat Cooling BTU : 12000/11800 Reverse Heating BTU : 11000/10800 Voltage : 230/208 EER : 11.4/11.4 COP @ 47°F : 3.47/3.44 Cooling Area (Sq Ft.) : 450-550 Model : PZH12R3SB Operation : Cool/Elect. Heat Cooling BTU : 12000 Reverse Heating BTU : 11400 Voltage : 265 EER : 10.6 COP @ 47°F :  3.3 Cooling Area (Sq Ft.) : 450-550 Model : PZH15K5SB Operation : Cool/Elect. Heat Cooling BTU : 14500/14300 Reverse Heating BTU : 13600/13200 Voltage : 230/208 EER : 10.2/10.2 COP @ 47°F : 3.38/3.36 Cooling Area (Sq Ft.) : 550-650 Chassis Sizes for this Product : H: 16“ x W: 42“ x D: 21 1⁄2” FreshAire PTAC Model Dimensions Applies to model #’s: PZE07K3SB, PZE09K3SB, PZE09R3SB, PZE12K3SB, PZE12R3SB, PZE15K5SB, PZH07K2SB, PZH09K3SB, PZH09R3SB, PZH12K3SB, PZH12R3SB, PZH15K5SB Features : Durable Construction : Superior materials and design reduce sound levels and improve overall guest satisfaction. Galvanized zinc coated steel wall sleeve and steel base pan undergo an 11-step preparation process, are powder coated with a polyester finish, and are oven-cured at high temperature for exceptional durability. Aluminum endplates reduce corrosion of the outdoor coil. Energy Efficiency : Friedrich PTACs feature a super-efficient refrigeration design with EERs up to 12.0 and COP up to 3.55. Energy efficient heat pump models are also available in our complete line. Comfort & Convenience : Intuitive unit controls are user friendly with easy-to-read LED display that can show either set point or actual room temperature as selected by owner. Dehumidification removes moisture in cool mode to improve comfort and reduce the chance of mold and mildew growth. Sound Reduction Technology : Friedrich PTACs come standard with two permanently lubricated fan motors for added durability and reduced sound levels indoors. Units also have a quiet, efficient rotary compressor mounted with vibration isolators to keep the compressor running smoothly and quietly. High-density insulation and steel inner wall block outdoor noise. Warranty & Support :  Friedrich’s industry leading warranty features 2-year full warranty on parts and labor and 5-year limited warranty. Our nationwide service network and U.S.-based Friedrich expert technical team ensures you get fast, knowledgeable service. Maintenance and Installation :  Modular product design ensures easy access to key components for cleaning and repairs, including washable, lift-out air filters. Surehold Front Cover System® securely attaches the front each time. Unit may be installed low to the floor.  

  • GE ZONELINE DELUXE SERIES HEAT PUMP UNIT WITH CORROSION PROTECTION, 265 VOLT AZ61H12EAC

    SKU: 30686

    Description :

    Specs & Details : Cooling capacity Energy efficiency Dehumidification Dimensions : 16 H x 42 W x 20 7/8 D CAPACITY : Cooling BTUH (MIN) : 11700.0 Btu Cooling EER (BTUH / Watt) : 11.6 CFM Indoor Fan High : 370 CFM Indoor Fan Low : 284 Dehumidification (pts./hr.) : 3.5 Heating - Reverse Cycle - BTUH : 10700 Vent CFM (high fan at zero ESP) : 75/45 FEATURES : Sensible Heat Ratio : 70% Chassis Type : Slide-In Control Type : Standard Microcomputer Tactile touch pad with LED Display Corrosion Treated : Yes Discharge Grille : 2-position Electronic Micro Computer Control : Yes Fan Cycle Switch : Yes Fan Motor : 2 Fan Speed Control : Yes Fan Speed Selections : Hi/Low Cooling Hi/Low Fan Only Hi/Low Heating Filter Type : Rigid Frame Slide-Out Heat - Cool : Yes Louver Style : Reversible Manual Vent Control : Hidden Rotary Compressor : Yes Temperature Limiting : Electronic 7-Step Vent Control : 3-position Venting Features : Concealed Manual Vent Control Outdoor Vent Control - 3 Positions Vent Air Filter Zoneline Features : "Sleep" Mode "Smart Fan" Fan Cycle Control 3-Stage Heating Design Auto Power Recovery Automatic Emergency Heat Automatic Indoor Frost Control Central Desk Control Compatibility Freeze Sentinel Heat Pump with Resistance Heat Backup Heat Pump with Supplemental Resistance Heat Heat Sentinel Power Cord (LDCI) included Proportional - Integral ID Airflow Quick Heat Recovery Random Twist/Length Segment Tangential Blower Remote Thermostat Compatibility Reverse Cycle Defrost Universal Heaters Weather Protected Electrical Components Temperature Range : 60 - 85 F POWER / RATINGS : Cooling - Amperes; F.L. - Cooling : 4.0 Cooling - Amperes; L.R. : 23.5 Cooling - Watts : 1000 Heating - Reverse Cycle - Amps : 3.6 Heating - Reverse Cycle - COP : 3.6 Heating - Reverse Cycle - Watts : 870 Power Factor : 92 Voltage (MAX) : 265.0 V WARRANTY : Parts Warranty : Limited 1-year entire appliance Limited 5-year sealed refrigerating system Labor Warranty : Limited 1-year entire appliance Limited 5-year sealed refrigerating system Warranty Notes : See written warranty for full details WEIGHTS & DIMENSIONS : Net Weight : 104.0 lb Overall Depth : 20.875 in Overall Height : 16.0 in Overall Width : 42.0 in Overall Depth (Excludes Sleeve) : 19.8125 in Overall Height (Excludes Sleeve) : 15.5 in Overall Width (Excludes Sleeve) : 40.0 in  

  • 14,500 BTU Packaged Terminal Air Conditioner with Electric Heat, 10.4 EER, 3.1 Pts/Hr Dehumidification, Dual Motors, Room Freeze Protection and 265 Volts

    SKU: PDE15R5SG

    Description :

    Specifications : Width : 42 Inch Depth : 21 1/2 Inch Height : 16 Inch Cooling Capacity (BTU) : 14,500 BTU CFM Room Circulation : 400 CFM Chassis Type : Thru the Wall Wall Sleeve Included : No Control Type : Digital Remote Control Included : No Plug Type : 7-30P Product Information : Brand : Friedrich Model : PDE15R5SG Dimensions : Width : 42 Inch Depth : 21 1/2 Inch Height : 16 Inch Capacity : Cooling Capacity (BTU) : 14,500 BTU CFM Room Circulation : 400 CFM Features : Type : Wall Chassis Type : Thru the Wall Wall Sleeve Included : No Maximum Cooling Amps : 5.4 Amps Maximum Cooling Watts : 1,390 Watts Heat : Electric Heat Energy Efficiency Rating : 10.4 Control Type : Digital Remote Control Included : No PTAC : Yes Technical Details : Energy Star Rated : No ADA Compliant : No Plug Type : 7-30P Voltage : 265 Volts Features : Durable and Reliable Construction Stainless steel endplates reduce outdoor coil corrosion. Galvanized zinc coated steel wall sleeve and steel base pan undergo an 11-step preparation process, are powder  coated with a polyester finish and cured in an oven for exceptional durability. Additional heating element bottom plate above an improved heat shield provides extra thermal protection. Additional thermistor on the blower scroll outlet regulates internal temperature. Factory run-tested units reduce problems in the field. Internal diagnostic program can alert maintenance to component failures or operating problems. Fourteen numeric service error codes stored in memory facilitate rapid unit diagnostics. Easy access anti-microbial filters simplify maintenance and extend the life of the product. Room freeze protection initiates heat if temperature falls to 40°F in an unoccupied room. Random compressor restart protects electrical systems from overload when power is restored. Tamper-resistant, anodized stamped aluminum grille withstands chalking and oxidation. Break-proof control door design maintains the integrity of the unit. Indoor coil frost sensor protects the compressor to lengthen the life of the unit. Diamonblue Technology protects the outdoor coil from harsh environments. Industry leading warranty features 2 year full warranty on parts and labor and 5 year limited warranty. Nationwide service network and U.S.-based Friedrich expert technical team ensures you get fast, knowledgeable service. Energy Efficient and Energy Smart Super-efficient refrigeration design with 12.1 EER and 3.5 COP. Exceptional FriedrichLink energy management thermostats available (wired and wireless) with integrated occupancy sensor, five distinct energy presets and comprehensive remote management capability. Advanced coil design adds more surface area leading to higher efficiencies. Thicker steel inner-wall and foam construction decreases thermal transfer and energy loss. Electronic defrost control ensures more run time in efficient heat pump mode. Electronic temperature limiting to adjust low/high temperature range limits for reduced energy usage. Slinger ring technology in condensate removal system cools the coil and increases efficiency. Desk control ready to allow hotel owners to control units from a central location. Comfort, Health and IAQ Dehumidification removes up to 2.1 pints/hour of moisture in cool mode to improve comfort and reduce the chance of mold and mildew growth. Constant Fan mode provides constant fan operation in cooling or heating modes to create a steady stream of white noise that masks sound level changes when the compressor cycles on/off. Fresh air damper brings in fresh outside air when desired. Intuitive unit controls are user friendly with easy-to-read LED display that can show either set-point or actual room temperature as selected by owner. Anti-microbial air filters are easy to access and washable. Instant Heat on heat pump models quickly heats a room to the desired temperature for increased comfort. Even-heat monitoring checks room temperature and automatically adds heat boost if necessary. Automatic periodic sampling of room temperature to ensure desired conditions are maintained. Reversible indoor air louvers to easily change direction of airflow. Ease Of Maintenance and Installation Ease of SKU creation as universal heaters with heat capacities are determined by the power cords; can achieve up to 40 PTAC SKUs with 16 units by changing the power cord size. Modular product design ensures easy access to key components for cleaning and repairs, including washable, lift-out air filters. Remote thermostat pop-out wiring module allows easier wiring and unit change out without rewiring thermostat. Compact front is designed to preserve indoor floor space with a depth of 7-3/4 inches. Faultless Sure-hold Front Cover System securely attaches the front each time. Inner wall service plate provides service access to tangential blower bearing without having to open up the entire inner wall. May be installed flush with the floor. Sound Reduction Technology Two permanently lubricated fan motors for added durability and reduced sound levels indoors. Quiet, efficient rotary compressor mounted with vibration isolators to keep the compressor running smoothly and quietly. High-density insulation and steel inner wall block outdoor noise.  

  • PTAC-PREMIER 230v

    SKU: PTAC 230v

    Description :

    Specifications By Model : Model : PDE07K3SG Operation : Cool/Elect. Heat Cooling BTU : 7200/7000 Reverse Heating BTU : - Voltage : 230/208 EER : 13.0/13.0 COP @ 47°F : - Cooling Area (Sq Ft.) : 250-300 Model : PDE09K3SG Operation : Cool/Elect. Heat Cooling BTU : 9400/9200 Reverse Heating BTU : - Voltage : 230/208 EER : 12.1/12.1 COP @ 47°F : - Cooling Area (Sq Ft.) : 350–400 Model : PDE12K3SG Operation : Cool/Elect. Heat Cooling BTU : 11800/11600 Reverse Heating BTU : - Voltage : 230/208 EER : 11.6/11.6 COP @ 47°F : - Cooling Area (Sq Ft.) : 450-550 Model : PDE15K5SG Operation : Cool/Elect. Heat Cooling BTU : 14500/14200 Reverse Heating BTU : - Voltage : 230/208 EER : 10.4/10.4 COP @ 47°F : - Cooling Area (Sq Ft.) : 550-650   Chassis Sizes for this Product : H: 16“ x W: 42“ x D: 21 1⁄2” FreshAire PTAC Model Dimensions Features : Durable Construction : Superior materials and design reduce sound levels and improve overall guest satisfaction. Galvanized zinc coated steel wall sleeve and steel base pan undergo an 11-step preparation process, are powder coated with a polyester finish and are oven-cured at high temperature for exceptional durability. Stainless Steel endplates reduce corrosion of the outdoor coil. Energy Efficiency : Friedrich PTACs feature a super-efficient refrigeration design with EERs up to 13.0 and COP up to 3.6. Energy efficient heat pump models are also available in our complete line. Comfort & Convenience : Intuitive unit controls are user friendly with easy-to-read LED display that can show either set point or actual room temperature as selected by owner. Dehumidification removes moisture in cool mode to improve comfort and reduce the chance of mold and mildew growth. Sound Reduction Technology : Friedrich PTACs come standard with two permanently lubricated fan motors for added durability and reduced sound levels indoors. Units also have a quiet, efficient rotary compressor mounted with vibration isolators to keep the compressor running smoothly and quietly. High-density insulation and steel inner wall block outdoor noise. Warranty & Support : Friedrich’s industry leading warranty features 2-year full warranty on parts and labor and 5-year limited warranty. Our nationwide service network and U.S.-based Friedrich expert technical team ensures you get fast, knowledgeable service. Maintenance and Installation : Modular product design ensures easy access to key components for cleaning and repairs, including washable, lift-out air filters. Surehold Front Cover System® securely attaches the front each time. Unit may be installed low to the floor.  

  • GE ZONELINE DELUXE SERIES HEAT PUMP UNIT WITH ICR, 265 VOLT AZ61H09EAD

    SKU: 30687

    Description :

    Specs & Details : Cooling capacity Energy efficiency Dehumidification Dimensions : 16 H x 42 W x 20 7/8 D CAPACITY : Cooling BTUH (MIN) : 9200.0 Btu Cooling EER (BTUH / Watt) : 11.9 CFM Indoor Fan High : 360 CFM Indoor Fan Low : 211 Dehumidification (pts./hr.) : 2.7 Heating - Reverse Cycle - BTUH : 8200 Vent CFM (high fan at zero ESP) : 70/45 FEATURES : Sensible Heat Ratio : 75% Chassis Type : Slide-In Control Type : Standard Microcomputer Tactile touch pad with LED Display Discharge Grille : 2-position Electronic Micro Computer Control : Yes Fan Cycle Switch : Yes Fan Motor : 2 Fan Speed Control : Yes Fan Speed Selections : Hi/Low Cooling Hi/Low Fan Only Hi/Low Heating Filter Type : Rigid Frame Slide-Out Heat - Cool : Yes Internal Condensate Removal (ICR) : Yes Louver Style : Reversible Manual Vent Control : Hidden Rotary Compressor : Yes Temperature Limiting : Electronic 7-Step Vent Control : 3-position Venting Features : Concealed Manual Vent Control Outdoor Vent Control - 3 Positions Vent Air Filter Zoneline Features : "Sleep" Mode "Smart Fan" Fan Cycle Control 3-Stage Heating Design Auto Power Recovery Automatic Emergency Heat Automatic Indoor Frost Control Central Desk Control Compatibility Freeze Sentinel Heat Pump with Resistance Heat Backup Heat Pump with Supplemental Resistance Heat Heat Sentinel Power Cord (LDCI) included Proportional - Integral ID Airflow Quick Heat Recovery Random Twist/Length Segment Tangential Blower Remote Thermostat Compatibility Reverse Cycle Defrost Universal Heaters Weather Protected Electrical Components Temperature Range : 60 - 85 F POWER / RATINGS : Cooling - Amperes; F.L. - Cooling : 3.1 Cooling - Amperes; L.R. : 16.5 Cooling - Watts : 760 Heating - Reverse Cycle - Amps : 2.7 Heating - Reverse Cycle - COP : 3.6 Heating - Reverse Cycle - Watts : 665 Power Factor : 90 Voltage (MAX) : 265.0 V WARRANTY : Parts Warranty : Limited 1-year entire appliance Limited 5-year sealed refrigerating system Labor Warranty : Limited 1-year entire appliance Limited 5-year sealed refrigerating system Warranty Notes : See written warranty for full details WEIGHTS & DIMENSIONS : Net Weight : 106.0 lb Overall Depth : 20.875 in Overall Height : 16.0 in Overall Width : 42.0 in Overall Depth (Excludes Sleeve) : 19.8125 in Overall Height (Excludes Sleeve) : 15.5 in Overall Width (Excludes Sleeve) : 40.0 in  

  • 14,500 BTU Packaged Terminal Air Conditioner with 13,300 BTU Heat Pump, 5.0 kW Electric Heat Backup, 10.4 EER, 3.1 Pts/Hr Dehumidification and 265 Volts

    SKU: PDH15R5SG

    Description :

    Specifications : Width : 42 Inch Depth : 21 1/2 Inch Height : 16 Inch Cooling Capacity (BTU) : 14,500 BTU Heating Capacity (BTU) : 13,300 BTU CFM Room Circulation : 400 CFM Chassis Type : Thru the Wall Wall Sleeve Included : No Control Type : Digital Remote Control Included : No Plug Type : 7-30P Product Information : Brand : Friedrich Model :  PDH15R5SG Dimensions : Width : 42 Inch Depth : 21 1/2 Inch Height : 16 Inch Capacity : Cooling Capacity (BTU) : 14,500 BTU Heating Capacity (BTU) : 13,300 BTU CFM Room Circulation : 400 CFM Features : Type : Wall Chassis Type : Thru the Wall Wall Sleeve Included : No Maximum Cooling Amps : 5.4 Amps Maximum Cooling Watts : 1,390 Watts Maximum Heating Amps : 5 Amps Maximum Heating Watts : 1,255 Watts Heat : Heat Pump with Electric Heat Backup Energy Efficiency Rating : 10.4 Control Type : Digital Remote Control Included : No PTAC : Yes Technical Details : Energy Star Rated : No ADA Compliant : No Plug Type : 7-30P Voltage : 265 Volts Features : Durable and Reliable Construction Stainless steel endplates reduce outdoor coil corrosion. Galvanized zinc coated steel wall sleeve and steel base pan undergo an 11-step preparation process, are powder coated with a polyester finish and cured in an oven for exceptional durability. Additional heating element bottom plate above an improved heat shield provides extra thermal protection. Additional thermistor on the blower scroll outlet regulates internal temperature. Factory run-tested units reduce problems in the field. Internal diagnostic program can alert maintenance to component failures or operating problems. Fourteen numeric service error codes stored in memory facilitate rapid unit diagnostics. Easy access anti-microbial filters simplify maintenance and extend the life of the product. Room freeze protection initiates heat if temperature falls to 40°F in an unoccupied room. Random compressor restart protects electrical systems from overload when power is restored. Tamper-resistant, anodized stamped aluminum grille withstands chalking and oxidation. Break-proof control door design maintains the integrity of the unit. Indoor coil frost sensor protects the compressor to lengthen the life of the unit. Diamonblue Technology protects the outdoor coil from harsh environments. Industry leading warranty features 2 year full warranty on parts and labor and 5 year limited warranty. Nationwide service network and U.S.-based Friedrich expert technical team ensures you get fast, knowledgeable service. Energy Efficient and Energy Smart Super-efficient refrigeration design with 12.1 EER and 3.5 COP. Exceptional FriedrichLink energy management thermostats available (wired and wireless) with integrated occupancy sensor, five distinct energy presets and comprehensive remote management capability. Advanced coil design adds more surface area leading to higher efficiencies. Thicker steel inner-wall and foam construction decreases thermal transfer and energy loss. Electronic defrost control ensures more run time in efficient heat pump mode. Electronic temperature limiting to adjust low/high temperature range limits for reduced energy usage. Slinger ring technology in condensate removal system cools the coil and increases efficiency. Desk control ready to allow hotel owners to control units from a central location. Comfort, Health and IAQ Dehumidification removes up to 2.1 pints/hour of moisture in cool mode to improve comfort and reduce the chance of mold and mildew growth. Constant Fan mode provides constant fan operation in cooling or heating modes to create a steady stream of white noise that masks sound level changes when the compressor cycles on/off. Fresh air damper brings in fresh outside air when desired. Intuitive unit controls are user friendly with easy-to-read LED display that can show either set-point or actual room temperature as selected by owner. Anti-microbial air filters are easy to access and washable. Instant Heat on heat pump models quickly heats a room to the desired temperature for increased comfort. Even-heat monitoring checks room temperature and automatically adds heat boost if necessary. Automatic periodic sampling of room temperature to ensure desired conditions are maintained. Reversible indoor air louvers to easily change direction of airflow. Ease Of Maintenance and Installation Ease of SKU creation as universal heaters with heat capacities are determined by the power cords; can achieve up to 40 PTAC SKUs with 16 units by changing the power cord size. Modular product design ensures easy access to key components for cleaning and repairs, including washable, lift-out air filters. Remote thermostat pop-out wiring module allows easier wiring and unit change out without rewiring thermostat. Compact front is designed to preserve indoor floor space with a depth of 7-3/4 inches. Faultless Sure-hold Front Cover System securely attaches the front each time. Inner wall service plate provides service access to tangential blower bearing without having to open up the entire inner wall. May be installed flush with the floor. Sound Reduction Technology Two permanently lubricated fan motors for added durability and reduced sound levels indoors. Quiet, efficient rotary compressor mounted with vibration isolators to keep the compressor running smoothly and quietly. High-density insulation and steel inner wall block outdoor noise.  

  • PTAC HT PUMP-PREMIER 230v

    SKU: PTAC PUMP 230v

    Description :

    Our most efficient standard PTAC with exceptional performance and leading warranty for the lowest cost of operation. ZoneAire Premier PTAC is available in electric heat and heat pump options, ranging from 7,000 to 15,000 Btu. Specifications By Model : Model : PDH07K3SG Operation : Cool/Heat Pump Cooling BTU : 7200/7000 Reverse Heating BTU : 6000/5800 Voltage : 230/208 EER : 13.0/13.0 COP @ 47°F : 3.6/3.6 Cooling Area (Sq Ft.) : 250-300 Model : PDH09K3SG Operation : Cool/Heat Pump Cooling BTU : 9400/9200 Reverse Heating BTU : 8300/8100 Voltage : 230/208 EER : 12.1/12.1 COP @ 47°F : 3.5/3.5 Cooling Area (Sq Ft.) : 350–400 Model : PDH12K3SG Operation : Cool/Heat Pump Cooling BTU : 11800/11600 Reverse Heating BTU : 10600/10400 Voltage : 230/208 EER : 11.6/11.6 COP @ 47°F : 3.4/3.4 Cooling Area (Sq Ft.) : 450-550 Model : PDH15K5SG Operation : Cool/Heat Pump Cooling BTU : 14500/14200 Reverse Heating BTU : 13300/13000 Voltage : 230/208 EER : 10.4/10.4 COP @ 47°F : 3.1/3.1 Cooling Area (Sq Ft.) : 550-650   Chassis Sizes for this Product : H: 16“ x W: 42“ x D: 21 1⁄2” FreshAire PTAC Model Dimensions Features : Durable Construction : Superior materials and design reduce sound levels and improve overall guest satisfaction. Galvanized zinc coated steel wall sleeve and steel base pan undergo an 11-step preparation process, are powder coated with a polyester finish and are oven-cured at high temperature for exceptional durability. Stainless Steel endplates reduce corrosion of the outdoor coil. Energy Efficiency : Friedrich PTACs feature a super-efficient refrigeration design with EERs up to 13.0 and COP up to 3.6. Energy efficient heat pump models are also available in our complete line. Comfort & Convenience : Intuitive unit controls are user friendly with easy-to-read LED display that can show either set point or actual room temperature as selected by owner. Dehumidification removes moisture in cool mode to improve comfort and reduce the chance of mold and mildew growth. Sound Reduction Technology : Friedrich PTACs come standard with two permanently lubricated fan motors for added durability and reduced sound levels indoors. Units also have a quiet, efficient rotary compressor mounted with vibration isolators to keep the compressor running smoothly and quietly. High-density insulation and steel inner wall block outdoor noise. Warranty & Support : Friedrich’s industry leading warranty features 2-year full warranty on parts and labor and 5-year limited warranty. Our nationwide service network and U.S.-based Friedrich expert technical team ensures you get fast, knowledgeable service. Maintenance and Installation : Modular product design ensures easy access to key components for cleaning and repairs, including washable, lift-out air filters. Surehold Front Cover System® securely attaches the front each time. Unit may be installed low to the floor.  

  • GE ZONELINE DELUXE SERIES HEAT PUMP UNIT WITH ICR VOLT AZ61H09DAD

    SKU: 30688

    Description :

    Specs & Details : Cooling capacity Energy efficiency Dehumidification Dimensions : 16 H x 42 W x 20 7/8 D CAPACITY : Cooling BTUH (MIN) : 9100.0 Btu Cooling BTUH (MAX) : 9200.0 Btu Cooling EER (BTUH / Watt) : 11.9/11.9 CFM Indoor Fan High : 360 CFM Indoor Fan Low : 212 Dehumidification (pts./hr.) : 2.7 Heating - Reverse Cycle - BTUH : 8100/8000 Vent CFM (high fan at zero ESP) : 70/45 FEATURES : Sensible Heat Ratio : 75% Chassis Type : Slide-In Control Type : Standard Microcomputer Tactile touch pad with LED Display Discharge Grille : 2-position Electronic Micro Computer Control : Yes Fan Cycle Switch : Yes Fan Motor : 2 Fan Speed Control : Yes Fan Speed Selections : Hi/Low Cooling Hi/Low Fan Only Hi/Low Heating Filter Type : Rigid Frame Slide-Out Heat - Cool : Yes Internal Condensate Removal (ICR) : Yes Louver Style : Reversible Manual Vent Control : Hidden Rotary Compressor : Yes Temperature Limiting : Electronic 7-Step Vent Control : 3-position Venting Features : Concealed Manual Vent Control Outdoor Vent Control - 3 Positions Vent Air Filter Zoneline Features : "Sleep" Mode "Smart Fan" Fan Cycle Control 3-Stage Heating Design Auto Power Recovery Automatic Emergency Heat Automatic Indoor Frost Control Central Desk Control Compatibility Freeze Sentinel Heat Pump with Resistance Heat Backup Heat Pump with Supplemental Resistance Heat Heat Sentinel Power Cord (LDCI) included Proportional - Integral ID Airflow Quick Heat Recovery Random Twist/Length Segment Tangential Blower Remote Thermostat Compatibility Reverse Cycle Defrost Universal Heaters Weather Protected Electrical Components Temperature Range : 60 - 85 F POWER / RATINGS : Cooling - Amperes; F.L. - Cooling : 3.5/3.8 Cooling - Amperes; L.R. : 21.0 Cooling - Watts : 760/750 Heating - Reverse Cycle - Amps : 3.1/3.3 Heating - Reverse Cycle - COP : 3.6/3.6 Heating - Reverse Cycle - Watts : 655/640 Power Factor : 92 Voltage (MIN) : 208.0 V Voltage (MAX) : 230.0 V WARRANTY : Parts Warranty : Limited 1-year entire appliance Limited 5-year sealed refrigerating system Labor Warranty : Limited 1-year entire appliance Limited 5-year sealed refrigerating system Warranty Notes : See written warranty for full details WEIGHTS & DIMENSIONS : Net Weight : 108.0 lb Overall Depth : 20.875 in Overall Height : 16.0 in Overall Width : 42.0 in Overall Depth (Excludes Sleeve) : 19.8125 in Overall Height (Excludes Sleeve) : 15.5 in Overall Width (Excludes Sleeve) : 40.0 in  

  • PTAC-PREMIER 265v

    SKU: PTAC PREMIER 265v

    Description :

    Our most efficient standard PTAC with exceptional performance and leading warranty for the lowest cost of operation. ZoneAire Premier PTAC is available in electric heat and heat pump options, ranging from 7,000 to 15,000 Btu. Specifications By Model : Model : PDE07R3SG Operation : Cool/Elect. Heat Cooling BTU : 7200 Reverse Heating BTU : - Voltage : 265 EER : 13.0 COP @ 47°F : - Cooling Area (Sq Ft.) : 250-300 Model : PDE09R3SG Operation : Cool/Elect. Heat Cooling BTU : 9400 Reverse Heating BTU : - Voltage : 265 EER : 12.1 COP @ 47°F : - Cooling Area (Sq Ft.) : 350–400 Model : PDE12R3SG Operation : Cool/Elect. Heat Cooling BTU : 11800 Reverse Heating BTU : - Voltage : 265 EER : 11.6 COP @ 47°F : - Cooling Area (Sq Ft.) : 450-550 Model : PDE15R5SG Operation : Cool/Elect. Heat Cooling BTU : 14500 Reverse Heating BTU : - Voltage : 265 EER : 10.4 COP @ 47°F : - Cooling Area (Sq Ft.) : 550-650   Chassis Sizes for this Product : H : 16“ x W : 42“ x D : 21 1⁄2” FreshAire PTAC Model Dimensions Features : Durable Construction :  Superior materials and design reduce sound levels and improve overall guest satisfaction. Galvanized zinc coated steel wall sleeve and steel base pan undergo an 11-step preparation process, are powder coated with a polyester finish and are oven-cured at high temperature for exceptional durability. Stainless Steel endplates reduce corrosion of the outdoor coil. Energy Efficiency : Friedrich PTACs feature a super-efficient refrigeration design with EERs up to 13.0 and COP up to 3.6. Energy efficient heat pump models are also available in our complete line. Comfort & Convenience : Intuitive unit controls are user friendly with easy-to-read LED display that can show either set point or actual room temperature as selected by owner. Dehumidification removes moisture in cool mode to improve comfort and reduce the chance of mold and mildew growth. Sound Reduction Technology : Friedrich PTACs come standard with two permanently lubricated fan motors for added durability and reduced sound levels indoors. Units also have a quiet, efficient rotary compressor mounted with vibration isolators to keep the compressor running smoothly and quietly. High-density insulation and steel inner wall block outdoor noise. Warranty & Support : Friedrich’s industry leading warranty features 2-year full warranty on parts and labor and 5-year limited warranty. Our nationwide service network and U.S.-based Friedrich expert technical team ensures you get fast, knowledgeable service. Maintenance and Installation : Modular product design ensures easy access to key components for cleaning and repairs, including washable, lift-out air filters. Surehold Front Cover System® securely attaches the front each time. Unit may be installed low to the floor.  

  • GE ZONELINE DELUXE SERIES HEAT PUMP UNIT, 265 VOLT AZ61H15EAB

    SKU: 30689

    Description :

    Specs & Details : Cooling capacity Energy efficiency Dehumidification Dimensions : 16 H x 42 W x 20 7/8 D CAPACITY : Cooling BTUH (MIN) : 14400.0 Btu Cooling EER (BTUH / Watt) : 10.6 CFM Indoor Fan High : 370 CFM Indoor Fan Low : 290 Dehumidification (pts./hr.) : 4.5 Heating - Reverse Cycle - BTUH : 13500 Vent CFM (high fan at zero ESP) : 75/45 FEATURES : Sensible Heat Ratio : 65% Chassis Type : Slide-In Control Type : Standard Microcomputer Tactile touch pad with LED Display Discharge Grille : 2-position Electronic Micro Computer Control : Yes Fan Cycle Switch : Yes Fan Motor : 2 Fan Speed Control : Yes Fan Speed Selections : Hi/Low Cooling Hi/Low Fan Only Hi/Low Heating Filter Type : Rigid Frame Slide-Out Heat - Cool : Yes Louver Style : Reversible Manual Vent Control : Hidden Rotary Compressor : Yes Temperature Limiting : Electronic 7-Step Vent Control : 3-position Venting Features : Concealed Manual Vent Control Outdoor Vent Control - 3 Positions Vent Air Filter Zoneline Features : "Sleep" Mode "Smart Fan" Fan Cycle Control 3-Stage Heating Design Auto Power Recovery Automatic Emergency Heat Automatic Indoor Frost Control Central Desk Control Compatibility Freeze Sentinel Heat Pump with Resistance Heat Backup Heat Pump with Supplemental Resistance Heat Heat Sentinel Power Cord (LDCI) included Proportional - Integral ID Airflow Quick Heat Recovery Random Twist/Length Segment Tangential Blower Remote Thermostat Compatibility Reverse Cycle Defrost Universal Heaters Weather Protected Electrical Components Temperature Range : 60 - 85 F POWER / RATINGS : Cooling - Amperes; F.L. - Cooling : 5.4 Cooling - Amperes; L.R. : 26.0 Cooling - Watts : 1355 Heating - Reverse Cycle - Amps : 5.0 Heating - Reverse Cycle - COP : 3.3 Heating - Reverse Cycle - Watts : 1165 Power Factor : 93 Voltage (MAX) : 265.0 V WARRANTY : Parts Warranty : Limited 1-year entire appliance Limited 5-year sealed refrigerating system Labor Warranty : Limited 1-year entire appliance Limited 5-year sealed refrigerating system Warranty Notes : See written warranty for full details WEIGHTS & DIMENSIONS : Net Weight : 104.0 lb Overall Depth : 20.875 in Overall Height : 16.0 in Overall Width : 42.0 in Overall Depth (Excludes Sleeve) : 19.8125 in Overall Height (Excludes Sleeve) : 15.5 in Overall Width (Excludes Sleeve) : 40.0 in  

  • 11,800 BTU Packaged Terminal Air Conditioner with Electric Heat, 11.6 EER, 2.7 Pts/Hr Dehumidification, Dual Motors, Room Freeze Protection and 265 Volts

    SKU: PDE12R3SG

    Description :

    Specifications : Width : 42 Inch Depth : 21 1/2 Inch Height : 16 Inch Cooling Capacity (BTU) : 11,800 BTU CFM Room Circulation : 400 CFM Chassis Type : Thru the Wall Wall Sleeve Included : No Control Type : Digital Remote Control Included : No Plug Type : 7-20P Product Information : Brand : Friedrich Model : PDE12R3SG Dimensions : Width : 42 Inch Depth : 21 1/2 Inch Height : 16 Inch Capacity : Cooling Capacity (BTU) : 11,800 BTU CFM Room Circulation : 400 CFM Features : Type : Wall Chassis Type : Thru the Wall Wall Sleeve Included : No Maximum Cooling Amps : 4.2 Amps Maximum Cooling Watts : 1,015 Watts Heat : Electric Heat Energy Efficiency Rating : 11.6 Control Type : Digital Remote Control Included : No PTAC : Yes Technical Details : Energy Star Rated : No ADA Compliant : No Plug Type : 7-20P Voltage : 265 Volts Features : Durable and Reliable Construction Stainless steel endplates reduce outdoor coil corrosion. Galvanized zinc coated steel wall sleeve and steel base pan undergo an 11-step preparation process, are powder coated with a polyester finish and cured in an oven for exceptional durability. Additional heating element bottom plate above an improved heat shield provides extra thermal protection. Additional thermistor on the blower scroll outlet regulates internal temperature. Factory run-tested units reduce problems in the field. Internal diagnostic program can alert maintenance to component failures or operating problems. Fourteen numeric service error codes stored in memory facilitate rapid unit diagnostics. Easy access anti-microbial filters simplify maintenance and extend the life of the product. Room freeze protection initiates heat if temperature falls to 40°F in an unoccupied room. Random compressor restart protects electrical systems from overload when power is restored. Tamper-resistant, anodized stamped aluminum grille withstands chalking and oxidation. Break-proof control door design maintains the integrity of the unit. Indoor coil frost sensor protects the compressor to lengthen the life of the unit. Diamonblue Technology protects the outdoor coil from harsh environments. Industry leading warranty features 2 year full warranty on parts and labor and 5 year limited warranty. Nationwide service network and U.S.-based Friedrich expert technical team ensures you get fast, knowledgeable service. Energy Efficient and Energy Smart Super-efficient refrigeration design with 12.1 EER and 3.5 COP. Exceptional FriedrichLink energy management thermostats available (wired and wireless) with integrated occupancy sensor, five distinct energy presets and comprehensive remote management capability. Advanced coil design adds more surface area leading to higher efficiencies. Thicker steel inner-wall and foam construction decreases thermal transfer and energy loss. Electronic defrost control ensures more run time in efficient heat pump mode. Electronic temperature limiting to adjust low/high temperature range limits for reduced energy usage. Slinger ring technology in condensate removal system cools the coil and increases efficiency. Desk control ready to allow hotel owners to control units from a central location. Comfort, Health and IAQ Dehumidification removes up to 2.1 pints/hour of moisture in cool mode to improve comfort and reduce the chance of mold and mildew growth. Constant Fan mode provides constant fan operation in cooling or heating modes to create a steady stream of white noise that masks sound level changes when the compressor cycles on/off. Fresh air damper brings in fresh outside air when desired. Intuitive unit controls are user friendly with easy-to-read LED display that can show either set-point or actual room temperature as selected by owner. Anti-microbial air filters are easy to access and washable. Instant Heat on heat pump models quickly heats a room to the desired temperature for increased comfort. Even-heat monitoring checks room temperature and automatically adds heat boost if necessary. Automatic periodic sampling of room temperature to ensure desired conditions are maintained. Reversible indoor air louvers to easily change direction of airflow.   Ease Of Maintenance and Installation Ease of SKU creation as universal heaters with heat capacities are determined by the power cords; can achieve up to 40 PTAC SKUs with 16 units by changing the power cord size. Modular product design ensures easy access to key components for cleaning and repairs, including washable, lift-out air filters. Remote thermostat pop-out wiring module allows easier wiring and unit change out without rewiring thermostat. Compact front is designed to preserve indoor floor space with a depth of 7-3/4 inches. Faultless Sure-hold Front Cover System securely attaches the front each time. Inner wall service plate provides service access to tangential blower bearing without having to open up the entire inner wall. May be installed flush with the floor. Sound Reduction Technology Two permanently lubricated fan motors for added durability and reduced sound levels indoors. Quiet, efficient rotary compressor mounted with vibration isolators to keep the compressor running smoothly and quietly. High-density insulation and steel inner wall block outdoor noise.  

  • PTAC HT PUMP-PREMIER 265v

    SKU: PTAC PUMP PREMIER 265v

    Description :

    Our most efficient standard PTAC with exceptional performance and leading warranty for the lowest cost of operation. ZoneAire Premier PTAC is available in electric heat and heat pump options, ranging from 7,000 to 15,000 Btu. Specifications By Model : Model : PDH07R3SG Operation : Cool/Heat Pump Cooling BTU : 7200 Reverse Heating BTU : 6000 Voltage : 265 EER : 13.0 COP @ 47°F : 3.6 Cooling Area (Sq Ft.) : 250-300 Model : PDH09R3SG Operation : Cool/Heat Pump Cooling BTU : 9400 Reverse Heating BTU : 8300 Voltage : 265 EER : 12.1 COP @ 47°F : 3.5 Cooling Area (Sq Ft.) : 350–400 Model : PDH12R3SG Operation : Cool/Heat Pump Cooling BTU : 11800 Reverse Heating BTU : 10600 Voltage : 265 EER : 11.6 COP @ 47°F : 3.4 Cooling Area (Sq Ft.) : 450-550 Model : PDH15R5SG Operation : Cool/Heat Pump Cooling BTU : 14500 Reverse Heating BTU : 13300 Voltage : 265 EER : 10.4 COP @ 47°F : 3.1 Cooling Area (Sq Ft.) : 550-650   Chassis Sizes for this Product : H: 16“ x W: 42“ x D : 21 1⁄2” FreshAire PTAC Model Dimensions Features : Durable Construction : Superior materials and design reduce sound levels and improve overall guest satisfaction. Galvanized zinc coated steel wall sleeve and steel base pan undergo an 11-step preparation process, are powder coated with a polyester finish and are oven-cured at high temperature for exceptional durability. Stainless Steel endplates reduce corrosion of the outdoor coil. Energy Efficiency : Friedrich PTACs feature a super-efficient refrigeration design with EERs up to 13.0 and COP up to 3.6. Energy efficient heat pump models are also available in our complete line. Comfort & Convenience : Intuitive unit controls are user friendly with easy-to-read LED display that can show either set point or actual room temperature as selected by owner. Dehumidification removes moisture in cool mode to improve comfort and reduce the chance of mold and mildew growth. Sound Reduction Technology : Friedrich PTACs come standard with two permanently lubricated fan motors for added durability and reduced sound levels indoors. Units also have a quiet, efficient rotary compressor mounted with vibration isolators to keep the compressor running smoothly and quietly. High-density insulation and steel inner wall block outdoor noise. Warranty & Support : Friedrich’s industry leading warranty features 2-year full warranty on parts and labor and 5-year limited warranty. Our nationwide service network and U.S.-based Friedrich expert technical team ensures you get fast, knowledgeable service. Maintenance and Installation : Modular product design ensures easy access to key components for cleaning and repairs, including washable, lift-out air filters. Surehold Front Cover System® securely attaches the front each time. Unit may be installed low to the floor.  

  • GE ZONELINE DELUXE SERIES HEAT PUMP UNIT WITH CORROSION PROTECTION, 230/208 VOLT AZ61H12DAC

    SKU: 30690

    Description :

    Specs & Details : Cooling capacity Energy efficiency Dehumidification Dimensions : 16 H x 42 W x 20 7/8 D CAPACITY : Cooling BTUH (MIN) : 11600.0 Btu Cooling BTUH (MAX) : 11700.0 Btu Cooling EER (BTUH / Watt) : 11.6/11.6 CFM Indoor Fan High : 370 CFM Indoor Fan Low : 284 Dehumidification (pts./hr.) : 3.5 Heating - Reverse Cycle - BTUH : 10600/10400 Vent CFM (high fan at zero ESP) : 75/45 FEATURES : Sensible Heat Ratio : 70% Chassis Type : Slide-In Control Type : Standard Microcomputer Tactile touch pad with LED Display Corrosion Treated : Yes Discharge Grille : 2-position Electronic Micro Computer Control : Yes Fan Cycle Switch : Yes Fan Motor : 2 Fan Speed Control : Yes Fan Speed Selections : Hi/Low Cooling Hi/Low Fan Only Hi/Low Heating Filter Type : Rigid Frame Slide-Out Heat - Cool : Yes Louver Style : Reversible Manual Vent Control : Hidden Rotary Compressor : Yes Temperature Limiting : Electronic 7-Step Vent Control : 3-position Venting Features : Concealed Manual Vent Control Outdoor Vent Control - 3 Positions Vent Air Filter Zoneline Features : "Sleep" Mode "Smart Fan" Fan Cycle Control 3-Stage Heating Design Auto Power Recovery Automatic Emergency Heat Automatic Indoor Frost Control Central Desk Control Compatibility Freeze Sentinel Heat Pump with Resistance Heat Backup Heat Pump with Supplemental Resistance Heat Heat Sentinel Power Cord (LDCI) included Proportional - Integral ID Airflow Quick Heat Recovery Random Twist/Length Segment Tangential Blower Remote Thermostat Compatibility Reverse Cycle Defrost Universal Heaters Weather Protected Electrical Components Temperature Range : 60 - 85 F POWER / RATINGS : Cooling - Amperes; F.L. - Cooling : 4.6/5.0 Cooling - Amperes; L.R. : 29.5 Cooling - Watts : 985/965 Heating - Reverse Cycle - Amps : 4.1/4.5 Heating - Reverse Cycle - COP : 3.6/3.6 Heating - Reverse Cycle - Watts : 855/835 Power Factor : 92 Voltage (MIN) : 208.0 V Voltage (MAX) : 230.0 V WARRANTY : Parts Warranty : Limited 1-year entire appliance Limited 5-year sealed refrigerating system Labor Warranty : Limited 1-year entire appliance Limited 5-year sealed refrigerating system Warranty Notes : See written warranty for full details WEIGHTS & DIMENSIONS : Net Weight : 105.0 lb Overall Depth : 20.875 in Overall Height : 16.0 in Overall Width : 42.0 in Overall Depth (Excludes Sleeve) : 19.8125 in Overall Height (Excludes Sleeve) : 15.5 in Overall Width (Excludes Sleeve) : 40.0 in  

  • 11,800 BTU Packaged Terminal Air Conditioner with 10,600 BTU Heat Pump, 3.0 kW Electric Heat Backup, 11.6 EER, 2.7 Pts/Hr Dehumidification and 265 Volts

    SKU: PDH12R3SG

    Description :

    Specs & Details : Width : 42 Inch Depth : 21 1/2 Inch Height : 16 Inch Cooling Capacity (BTU) : 11,800 BTU Heating Capacity (BTU) : 10,600 BTU CFM Room Circulation : 400 CFM Chassis Type : Thru the Wall Wall Sleeve Included : No Control Type : Digital Remote Control Included : No Plug Type : 7-20P Product Information : Brand : Friedrich Model : PDH12R3SG Dimensions : Width : 42 Inch Depth : 21 1/2 Inch Height : 16 Inch Capacity : Cooling Capacity (BTU) : 11,800 BTU Heating Capacity (BTU) : 10,600 BTU CFM Room Circulation : 400 CFM Features : Type : Wall Chassis Type : Thru the Wall Wall Sleeve Included : No Maximum Cooling Amps : 4.2 Amps Maximum Cooling Watts : 1,015 Watts Maximum Heating Amps : 3.7 Amps Maximum Heating Watts : 910 Watts Heat : Heat Pump with Electric Heat Backup Energy Efficiency Rating : 11.6 Control Type : Digital Remote Control Included : No PTAC : Yes Technical Details : Energy Star Rated : No ADA Compliant : No Plug Type : 7-20P Voltage : 265 Volts Features : Durable and Reliable Construction Stainless steel endplates reduce outdoor coil corrosion. Galvanized zinc coated steel wall sleeve and steel base pan undergo an 11-step preparation process, are powder coated with a polyester finish and cured in an oven for exceptional durability. Additional heating element bottom plate above an improved heat shield provides extra thermal protection. Additional thermistor on the blower scroll outlet regulates internal temperature. Factory run-tested units reduce problems in the field. Internal diagnostic program can alert maintenance to component failures or operating problems. Fourteen numeric service error codes stored in memory facilitate rapid unit diagnostics. Easy access anti-microbial filters simplify maintenance and extend the life of the product. Room freeze protection initiates heat if temperature falls to 40°F in an unoccupied room. Random compressor restart protects electrical systems from overload when power is restored. Tamper-resistant, anodized stamped aluminum grille withstands chalking and oxidation. Break-proof control door design maintains the integrity of the unit. Indoor coil frost sensor protects the compressor to lengthen the life of the unit. Diamonblue Technology protects the outdoor coil from harsh environments. Industry leading warranty features 2 year full warranty on parts and labor and 5 year limited warranty. Nationwide service network and U.S.-based Friedrich expert technical team ensures you get fast, knowledgeable service. Energy Efficient and Energy Smart Super-efficient refrigeration design with 12.1 EER and 3.5 COP. Exceptional FriedrichLink energy management thermostats available (wired and wireless) with integrated occupancy sensor, five distinct energy presets and comprehensive remote management capability. Advanced coil design adds more surface area leading to higher efficiencies. Thicker steel inner-wall and foam construction decreases thermal transfer and energy loss. Electronic defrost control ensures more run time in efficient heat pump mode. Electronic temperature limiting to adjust low/high temperature range limits for reduced energy usage. Slinger ring technology in condensate removal system cools the coil and increases efficiency. Desk control ready to allow hotel owners to control units from a central location. Comfort, Health and IAQ Dehumidification removes up to 2.1 pints/hour of moisture in cool mode to improve comfort and reduce the chance of mold and mildew growth. Constant Fan mode provides constant fan operation in cooling or heating modes to create a steady stream of white noise that masks sound level changes when the compressor cycles on/off. Fresh air damper brings in fresh outside air when desired. Intuitive unit controls are user friendly with easy-to-read LED display that can show either set-point or actual room temperature as selected by owner. Anti-microbial air filters are easy to access and washable. Instant Heat on heat pump models quickly heats a room to the desired temperature for increased comfort. Even-heat monitoring checks room temperature and automatically adds heat boost if necessary. Automatic periodic sampling of room temperature to ensure desired conditions are maintained. Reversible indoor air louvers to easily change direction of airflow.   Ease Of Maintenance and Installation Ease of SKU creation as universal heaters with heat capacities are determined by the power cords; can achieve up to 40 PTAC SKUs with 16 units by changing the power cord size. Modular product design ensures easy access to key components for cleaning and repairs, including washable, lift-out air filters. Remote thermostat pop-out wiring module allows easier wiring and unit change out without rewiring thermostat. Compact front is designed to preserve indoor floor space with a depth of 7-3/4 inches. Faultless Sure-hold Front Cover System securely attaches the front each time. Inner wall service plate provides service access to tangential blower bearing without having to open up the entire inner wall. May be installed flush with the floor. Sound Reduction Technology Two permanently lubricated fan motors for added durability and reduced sound levels indoors. Quiet, efficient rotary compressor mounted with vibration isolators to keep the compressor running smoothly and    quietly. High-density insulation and steel inner wall block outdoor noise.  

  • PTAC HT PUMP - FRESHAIRE 230v

    SKU: PTAC FRESHAIRE 230v

    Description :

    The most advanced PTAC ever. Inverter compressor delivers best-in-class efficiencies with ultra-quiet operation. Friedrich's award-winning and patented FreshAire system helps achieve ASHRAE 62.1-2013 requirements, and brings up to 52 CFM of conditioned, MERV 8 filtered, outside air into the space. Friedrich's FreshAire PTAC also boasts the highest STC ratings in the industry amongst PTACs with make-up air. The widest cooling and heating range in the industry with only 2 models. (9,000 and 12,000 Btu) Specifications By Model : Model : PVH09K3FB Operation : Cool/Heat Pump/Inverter Cooling BTU : 9600/9400 Cooling Range : 6462 - 12099 Reverse Heating BTU : 8200/8500 Voltage : 230/208 EER : 12.1/12.1 COP @ 47°F : 3.51/3.51 Cooling Area (Sq Ft.) : 400-450 Model : PVH12K3FB Operation : Cool/Heat Pump/Inverter Cooling BTU : 12000/11800 Cooling Range : 7929 - 17142 Reverse Heating BTU : 11600/11800 Voltage : 230/208 EER : 11.5/11.5 COP @ 47°F : 3.57/3.58 Cooling Area (Sq Ft.) : 450-550 Chassis Sizes for this Product : H: 16“ x W: 42“ x D: 21” FreshAire PTAC Model Dimensions Features : Conditioned Fresh Air : Friedrich’s FreshAire PTAC system helps achieve ASHRAE 62.1-2013 requirements, and brings up to 52 CFM of conditioned, MERV 8 filtered, outside air into the space. Patents-pending technology uses the inverter compressor and main cooling system to optimize temperature and humidity level of incoming air. Precision Inverter® Technology : Precision Inverter® variable speed compressors deliver efficiencies up to 13 EER and a 15 SEER equivalent. Compressors operate down to 20% of rated capacity, or up to 120%, matching the unit output to the actual demand of the space for increased comfort and lower energy consumption. Widest Cooling & Heating Range in the Industry : Variable speed technology gives you the flexibility of a full line of PTACs with only two models, and offers the highest available capacity of any 42x16 PTAC on the market at over 17000 Btus. The Smoothest PTAC Sound Available : The variable-speed operation of the FreshAire PTAC allows the unit to work at the optimal speed to match the true load of the room. This not only provides the best energy consumption curve but it also adds to guest comfort by eliminating the harsh start-ups associated with single speed compressors. Comfort & Convenience : Intuitive unit controls are user friendly with easy-to-read LED display that can show either set point or actual room temperature as selected by owner. Dehumidification removes moisture in cool mode to improve comfort and reduce the chance of mold and mildew growth. Maintenance and Installation : Modular product design ensures easy access to key components for cleaning and repairs, including washable, lift-out air filters. Surehold Front Cover System® securely attaches the front each time. Unit may be installed low to the floor.  

  • GE ZONELINE DELUXE SERIES HEAT PUMP UNIT WITH CORROSION PROTECTION, 265 VOLT AZ61H09EAC

    SKU: 30691

    Description :

    Specs & Details : Cooling capacity Energy efficiency Dehumidification Dimensions : 16 H x 42 W x 20 7/8 D CAPACITY : Cooling BTUH (MIN) : 9400.0 Btu Cooling EER (BTUH / Watt) : 12.2 CFM Indoor Fan High : 360 CFM Indoor Fan Low : 211 Dehumidification (pts./hr.) : 2.7 Heating - Reverse Cycle - BTUH : 8100 Vent CFM (high fan at zero ESP) : 70/45 FEATURES : Sensible Heat Ratio : 75% Chassis Type : Slide-In Control Type : Standard Microcomputer Tactile touch pad with LED Display Corrosion Treated : Yes Discharge Grille : 2-position Electronic Micro Computer Control : Yes Fan Cycle Switch : Yes Fan Motor : 2 Fan Speed Control : Yes Fan Speed Selections : Hi/Low Cooling Hi/Low Fan Only Hi/Low Heating Filter Type : Rigid Frame Slide-Out Heat - Cool : Yes Louver Style : Reversible Manual Vent Control : Hidden Rotary Compressor : Yes Temperature Limiting : Electronic 7-Step Vent Control : 3-position Venting Features : Concealed Manual Vent Control Outdoor Vent Control - 3 Positions Vent Air Filter Zoneline Features : "Sleep" Mode "Smart Fan" Fan Cycle Control 3-Stage Heating Design Auto Power Recovery Automatic Emergency Heat Automatic Indoor Frost Control Central Desk Control Compatibility Freeze Sentinel Heat Pump with Resistance Heat Backup Heat Pump with Supplemental Resistance Heat Heat Sentinel Power Cord (LDCI) included Proportional - Integral ID Airflow Quick Heat Recovery Random Twist/Length Segment Tangential Blower Remote Thermostat Compatibility Reverse Cycle Defrost Universal Heaters Weather Protected Electrical Components Temperature Range : 60 - 85 F POWER / RATINGS : Cooling - Amperes; F.L. - Cooling : 3.1 Cooling - Amperes; L.R. : 16.5 Cooling - Watts : 765 Heating - Reverse Cycle - Amps : 2.7 Heating - Reverse Cycle - COP : 3.6 Heating - Reverse Cycle - Watts : 655 Power Factor : 90 Voltage (MAX) : 265.0 V WARRANTY : Parts Warranty : Limited 1-year entire appliance Limited 5-year sealed refrigerating system Labor Warranty : Limited 1-year entire appliance Limited 5-year sealed refrigerating system Warranty Notes : See written warranty for full details WEIGHTS & DIMENSIONS : Net Weight : 104.0 lb Overall Depth : 20.875 in Overall Height : 16.0 in Overall Width : 42.0 in Overall Depth (Excludes Sleeve) : 19.8125 in Overall Height (Excludes Sleeve) : 15.5 in Overall Width (Excludes Sleeve) : 40.0 in  

  • 7,200 BTU Packaged Terminal Air Conditioner with 6,000 BTU Heat Pump, 3.0 kW Electric Heat Backup, 13.0 EER, 1.7 Pts/Hr Dehumidification and 230/208 Volts

    SKU: PDH07K3SG

    Description :

    Specifications : Width : 42 Inch Depth : 21 1/2 Inch Height : 16 Inch Cooling Capacity (BTU) : 7,200 BTU Heating Capacity (BTU) : 6,000 BTU CFM Room Circulation : 345 CFM Chassis Type : Thru the Wall Wall Sleeve Included : No Control Type : Digital Remote Control Included : No Plug Type : 6-20P Product Information : Brand : Friedrich Model : PDH07K3SG Dimensions : Width : 42 Inch Depth : 21 1/2 Inch Height : 16 Inch Capacity : Cooling Capacity (BTU) : 7,200 BTU Heating Capacity (BTU) : 6,000 BTU CFM Room Circulation : 345 CFM Features : Type : Wall Chassis Type : Thru the Wall Wall Sleeve Included : No Maximum Cooling Amps : 2.7 Amps Maximum Cooling Watts : 550 Watts Maximum Heating Amps : 2.4 Amps Maximum Heating Watts : 485 Watts Heat: Heat Pump with Electric Heat Backup Energy Efficiency Rating : 13 Control Type : Digital Remote Control Included : No PTAC : Yes Technical Details : Energy Star Rated : No ADA Compliant : No Plug Type : 6-20P Voltage : 230/208 Volts Features : Durable and Reliable Construction Stainless steel endplates reduce outdoor coil corrosion. Galvanized zinc coated steel wall sleeve and steel base pan undergo an 11-step preparation process, are powder  coated with a polyester finish and cured in an oven for exceptional durability.  Additional heating element bottom plate above an improved heat shield provides extra thermal protection.  Additional thermistor on the blower scroll outlet regulates internal temperature.  Factory run-tested units reduce problems in the field.  Internal diagnostic program can alert maintenance to component failures or operating problems. Fourteen numeric Service error codes stored in memory facilitate rapid unit diagnostics. Easy access anti-microbial filters simplify maintenance and extend the life of the product. Room freeze protection initiates heat if temperature falls to 40°F in an unoccupied room. Random compressor restart protects electrical systems from overload when power is restored. Tamper-resistant, anodized stamped aluminum grille withstands chalking and oxidation. Break-proof control door design maintains the integrity of the unit. Indoor coil frost sensor protects the compressor to lengthen the life of the unit. Diamonblue Technology protects the outdoor coil from harsh environments. Industry leading warranty features 2 year full warranty on parts and labor and 5 year limited warranty. Nationwide service network and U.S.-based Friedrich expert technical team ensures you get fast, knowledgeable service. Energy Efficient and Energy Smart Super-efficient refrigeration design with 12.1 EER and 3.5 COP. Exceptional FriedrichLink energy management thermostats available (wired and wireless) with integrated occupancy sensor, five distinct energy presets and comprehensive remote management capability. Advanced coil design adds more surface area leading to higher efficiencies.  Thicker steel inner-wall and foam construction decreases thermal transfer and energy loss.  Electronic defrost control ensures more run time in efficient heat pump mode.  Electronic temperature limiting to adjust low/high temperature range limits for reduced energy usage.  Slinger ring technology in condensate removal system cools the coil and increases efficiency.  Desk control ready to allow hotel owners to control units from a central location. Comfort, Health and IAQ Dehumidification removes up to 2.1 pints/hour of moisture in cool mode to improve comfort and reduce the chance of mold and mildew growth. Constant Fan mode provides constant fan operation in cooling or heating modes to create a steady stream of white noise that masks sound level changes when the compressor cycles on/off. Fresh air damper brings in fresh outside air when desired. Intuitive unit controls are user friendly with easy-to-read LED display that can show either set-point or actual room temperature as selected by owner. Anti-microbial air filters are easy to access and washable. Instant Heat on heat pump models quickly heats a room to the desired temperature for increased comfort. Even-heat monitoring checks room temperature and automatically adds heat boost if necessary. Automatic periodic sampling of room temperature to ensure desired conditions are maintained. Reversible indoor air louvers to easily change direction of airflow.   Ease Of Maintenance and Installation Ease of SKU creation as universal heaters with heat capacities are determined by the power cords; can achieve up to 40 PTAC SKUs with 16 units by changing the power cord size. Modular product design ensures easy access to key components for cleaning and repairs, including washable, lift-out air filters. Remote thermostat pop-out wiring module allows easier wiring and unit change out without rewiring thermostat. Compact front is designed to preserve indoor floor space with a depth of 7-3/4 inches. Faultless Sure-hold Front Cover System securely attaches the front each time. Inner wall service plate provides service access to tangential blower bearing without having to open up the entire inner wall. May be installed flush with the floor. Sound Reduction Technology Two permanently lubricated fan motors for added durability and reduced sound levels indoors. Quiet, efficient rotary compressor mounted with vibration isolators to keep the compressor running smoothly and quietly. High-density insulation and steel inner wall block outdoor noise.

  • PTAC HT PUMP - FRESHAIRE 265v

    SKU: PTAC PUMP FRESHAIRE 265v

    Description :

    The most advanced PTAC ever. Inverter compressor delivers best-in-class efficiencies with ultra-quiet operation. Friedrich's award-winning and patented FreshAire system helps achieve ASHRAE 62.1-2013 requirements, and brings up to 52 CFM of conditioned, MERV 8 filtered, outside air into the space. Friedrich's FreshAire PTAC also boasts the highest STC ratings in the industry amongst PTACs with make-up air. The widest cooling and heating range in the industry with only 2 models. (9,000 and 12,000 Btu) Specifications By Model : Model : PVH09R3FA Operation : Cool/Heat Pump/Inverter Cooling BTU : 9600 Cooling Range : 6462 - 12099 Reverse Heating BTU : 8500 Voltage : 265 EER : 12.0 COP @ 47°F : 3.51 Cooling Area (Sq Ft.) : 400-450 Model : PVH12R3FA Operation : Cool/Heat Pump/Inverter Cooling BTU : 12000 Cooling Range : 7929 - 17142 Reverse Heating BTU : 11800 Voltage : 265 EER : 11.5 COP @ 47°F : 3.57 Cooling Area (Sq Ft.) : 450-550 Model : PVH09R3FB Operation : Cool/Heat Pump/Inverter Cooling BTU : 9600 Cooling Range : 6462 - 12099 Reverse Heating BTU : 8500 Voltage : 265 EER : 12.0 COP @ 47°F : 3.51 Cooling Area (Sq Ft.) : 400-450 Model : PVH12R3FB Operation : Cool/Heat Pump/Inverter Cooling BTU : 12000 Cooling Range : 7929 - 17142 Reverse Heating BTU : 11800 Voltage : 265 EER : 11.5 COP @ 47°F : 3.57 Cooling Area (Sq Ft.) : 450-550 Chassis Sizes for this Product : H: 16“ x W: 42“ x D: 21” FreshAire PTAC Model Dimensions Features : Conditioned Fresh Air : Friedrich’s FreshAire PTAC system helps achieve ASHRAE 62.1-2013 requirements, and brings up to 52 CFM of conditioned, MERV 8 filtered, outside air into the space. Patents-pending technology uses the inverter compressor and main cooling system to optimize temperature and humidity level of incoming air. Precision Inverter® Technology : Precision Inverter® variable speed compressors deliver efficiencies up to 13 EER and a 15 SEER equivalent. Compressors operate down to 20% of rated capacity, or up to 120%, matching the unit output to the actual demand of the space for increased comfort and lower energy consumption. Widest Cooling & Heating Range in the Industry : Variable speed technology gives you the flexibility of a full line of PTACs with only two models, and offers the highest available capacity of any 42x16 PTAC on the market at over 17000 Btus. The Smoothest PTAC Sound Available : The variable-speed operation of the FreshAire PTAC allows the unit to work at the optimal speed to match the true load of the room. This not only provides the best energy consumption curve but it also adds to guest comfort by eliminating the harsh start-ups associated with single speed compressors. Comfort & Convenience : Intuitive unit controls are user friendly with easy-to-read LED display that can show either set point or actual room temperature as selected by owner. Dehumidification removes moisture in cool mode to improve comfort and reduce the chance of mold and mildew growth. Maintenance and Installation : Modular product design ensures easy access to key components for cleaning and repairs, including washable, lift-out air filters. Surehold Front Cover System® securely attaches the front each time. Unit may be installed low to the floor.  

@lodginggoods Find us on Instagram

Copyright © 2005 -2022